I jumped at the chance and was thrilled to know that I would be using some of Broncolor’s latest tech – the Siros L system – a completely wireless battery-powered lighting solution for photography. You can even control the Siros L from your smart device if you download the Broncolor BronControl app for the iOS!
To sweeten the experience further, I got to shoot on the Phase One XF 100MP as well as the old but gold Hasselblad H3DII-39 (medium format) camera systems!
Storyboarding came next. I had to decide what concept to work on and settled on cosplay photography.
I gathered my team for this epic endeavour and got hold of Rainer Cosplay for an epic collaboration that saw us experimenting with water, smoke and fire.
I had to figure out how best to portray Rainer Cosplay’s Lightning from Final Fantasy XIII) in an epic setting that utilizes not just our elements of fire, smoke and rain water but to put the Siros L through its paces so it can truly shine (no pun intended), while elevating Rainer’s expertise to the next level. Her cosplay is truly awesome!
Before we go any further, check out this awesome video that showcases behind-the-scenes highlights from our collaboration with Broncolor Singapore and Rainer Cosplay! Do watch it in full-screen and share it if you like it!
Throwing caution to the wind
Everything looked pretty cool, yes? But always remember this – safety is paramount. Before the shoot commenced, we prepared our safety equipment (fire extinguishers are our best friend), took note of the nearest fire hose, alerted the building’s management on our intention to do a photoshoot and had a safety briefing for both crew and talent.
We also made sure that we had nothing flammable near where we wanted to do the fire effects. All these steps are really important. It is also equally important that people exercise caution whenever fire is involved to avoid accidents to both personnel and property.
Take a look at this 360 degree immersive video to get an idea of what we have done.
I was aiming for a few really good shots. No more than 4 maybe. I wanted quality images out of this production, and not aim for quantity.
Challenges are only source material for stories to tell our grandchildren someday!
It was a challenge coordinating these elements with unfamiliar gear outdoors to get the shots that we really wanted. It was my first time shooting with these cameras and lighting system.
I was very used to my old Canon EOS 5D Mark III and my current workhorse, my Sony A7RII, as well as my two Bowens GM 500 strobe lighting systems. But I kept telling myself that light is just light, and a camera is just a camera. They all function the same and are tools of creation. It’s just a matter of how you use them, I tell myself.
A good friend and mentor of mine, Benjamin Von Wong reminded me that I should not worry too much about the gear and be more concerned about the vision.
Although shooting with these gear did give me a huge sense of satisfaction, I had to keep in mind that without a vision, the tools would be a total waste in my hands.
Going crazy with the logistics
I was provided with a few lighting and camera equipment, courtesy of Broncolor Singapore. Here’s the complete list of gear at our disposal that evening.
- • Broncolor Siros L 800 x3
- • Broncolor grids for the Siros L 800s x2
- • Broncolor Para 88 with grid x1
- • Broncolor MobiLED with Move1200L battery pack system
- • Broncolor RFS 2.1 tranceiver
- • Phase One XF 100MP medium format camera system
- • Hasselblad H3DII-39 medium format camera system
- • SF-01 studio fan
Team Mezame brought along our own 1200W generic smoke machine, rain maker contraption that we made ourselves following schematics by Benjamin Von Wong, our firestarter contraption which was inspired by an episode of DigitalRev TV’s Pro Tog, Cheap Camera Challenge.
We wanted to keep as much of the practical effects in the shot as we can. The studio fan was especially useful for giving the smoke and cape more volume. Rainer’s hair also had a bit of dynamic look about it thanks to the controlled wind.
Here is how the set looks like for both rain and fire configurations.
Knowing that I am a digital composite artist who is used to creating epic surreal and fantasy images through my photography and Photoshop, Eujin challenged me to get what I want in-camera (up to 90%).
This effectively got me to re-think my shooting styles and encouraged me to utilize the Siros L effectively to bring out Broncolor’s renowned 3-dimensional lighting’s capabilities.
During the photoshoot, we did run into several problems that we had to fix on the fly.
Coordinating Fire + Smoke + Cloak
It would look really great to have the cape tossed in sync with the smoke and fire. But to be honest, it was hard doing so as the wind conditions kept on changing.
Safety was still a primary concern so we had the fire way back, away from the talent. The Siros Ls were even further but they were still powerful enough to cast a beautiful rim light on the talent.
At one point, the alley’s design made the wind travel in spirals like a vortex, causing us to cease the shoot for a bit due to safety and also because it was virtually impossible to have the shot we wanted.
We had to wait it out.
In the end, we had no choice due to time constraints but to do a composite of the cloak from another image we took and adjust a bit of the fire to make it look the way it was intended. Admittedly, we sort of did not achieve the 90% challenge but hey, we had to make do.
I really wish we got the image that we wanted in camera but fire being fire, when combined with wind, made things a big challenge.
We tried to keep the ISO low (400) and the Broncolor lights really delivered. They were simple to use, easy to set up, lightweight and we had no issues with consistency of lighting. Throughout the shoot, the colours were as they should be.
One thing is consistent – soft and even lighting across the board with beautiful highlights and shadows, working as intended and meeting expected results.
The modeling lamps on the Siros L was truly a godsent. Working on my old Bowens GM 500s outdoors can be hellish because they do not have modeling lamps and I had to rely on separate LED lamps for pre-focusing among other things.
The Bowens also required a boxy (and bulky) battery pack and a cable to connect to it to power it up.
The Siros L does not. Its internal battery can be removed and can be charged separately from the main body. The LEDs on the battery that tell me how much charge it has left is also very helpful.
If you have sufficient batteries, you can literally work with your Siros Ls outdoors for as long as you need.
The Phase One XF 100 MP camera helped loads too, with its medium format sensor and 100 megapixel count of awesomeness. At 100% crop straight out of camera, the image is still sharp and you can see lots of details when we preview the images on Capture 1 Pro.
We had the Hasselblad H3DII-39 to try out too and attempted something a little bit more interesting. We wanted to capture streaks of rain and the only way to do so was with a slower shutter speed.After the shoot, I processed the images on Capture One Pro, Phocus, Adobe Photoshop CS6 Extended and Adobe Lightroom, further enhancing them.
Here’s Rainer Cosplay as Lightning from Final Fantasy XIII.
Photography by The Art of Mezame
Talent: Rainer Cosplay Props/costume/hair/makeup: Talent’s own
Assistants: Eugene Khaw, Raymond Ee, Sean Padman Israfil McMenamin, Shaun R. Verghese, Siti Zahara
BTS: Kyhl Nuar, Penry Hoh
Come 30th June 2016 (5pm-8pm), I will also be sharing my experience at the official launch of the Broncolor Siros L system in Singapore (somewhere in Marina). I hope to see you there! More details will come soon. Do check out my Facebook page for the latest updates.
Article originally published on The Art of Mezame.